Manufacturers Of Parallel Laying Of Steel Bridges And Pipelines
Dec 06, 2021
Steel bridge manufacturers sometimes have some problems during construction. If these problems cannot be resolved, they will have a very serious impact on our use. For example, it cannot be If the pipes are laid in parallel, if it is unavoidable, the following protective measures must be taken.
1. If it is laid in parallel with the corrosive liquid pipeline, the steel bridge manufacturer needs to lay it above the corrosive liquid pipeline.
2. The bridge should be laid under the heating pipe.
3. If the flammable and explosive gas in the pipeline is heavier than air, then we have to install the bridge above the pipeline.
4. If the flammable and explosive gas in the pipeline is heavier than air, then we need to install the bridge under the pipeline.
These are all issues that steel bridge manufacturers need to pay attention to when laying parallel to the pipeline, so that in the subsequent use, it will not have too much impact on us.
